INTULON FORUM

SD card / card readers:
Lexar Professional 2000x 32GB Card and Card Reader
4Gb/min

USB Flash drive
Corsair Flash Voyager GTX 128GB USB 3.1 Premium Flash Drive
9Gb/min

USB NVMe hard drive
Kingston 250GB A2000 M.2 2280 Nvme Internal SSD
17.5Gb/min

Great you figured it out. I wonder if the z-stick somehow needed a reset?
If it happens again, disconnect the z-stick, wait a few seconds, reconnect and try again.
If everything else fails, there's a reset button at the back of the z-stick that you can also press.

Are you still able to access the web interface?

Great work thearn!
Thanks for sharing.

thearn wrote:I just bought one of these units. I'm getting temps, humidity, and luminance readings okay, but I can't seem to trigger the motion sensor

Make sure the sensor is associated with the controller (node 1).

eebender wrote:Thanks for adding this capability, I've just upgraded my unit and am looking forward to trying it out. If I want define an action to run a user written script, where should the script be placed on the pi's file system? Would it be /home/pi?

/home/pi/customscripts is a good place.

This issue has been resolved in the latest release of Z-Command.
https://z-command.intulon.com/version-1-1-7024/

You must have the version with the Sigma Stick (ZC-SIG-US-W) and not the version with the Z-Stick (ZC-AEL-US-W).
Only Aeon Z-Stick has a button on the USB dongle.
You can exclude devices from the Z-Command web interface by clicking "reset device" and following the on-screen prompt.

dechutes, Welcome to the forum! Good to know Z-Command is working well with a previously unknown thermostat. Those sub-devices z-wave features that Z-Command detected but aren't implemented yet. Future upgrades will reveal what those are. You can safely ignore them for now. Can you upload a screensh...

By the very nature of wireless [z-wave] networks, it could be due to several things. Let's start by looking at these: How close is the switch to the controller? How good is your mesh network? Are there other signal repeaters if the distance between the switch and controller is large? How about inter...